Resources

Controlled product and compliance documents, matched to the product and destination market.

Public product facts

Information available before document request

Product system	Confirmed public scope	Confirm for application
SA / VD / ST / SP / NW / MT / QC / FD abrasive series	Sponge, hook-and-loop, sheet, spot-repair, non-woven, metallographic, quick-change, and flap-disc formats	Substrate, defect, wet or dry process, tool interface, and target finish
Polishing consumables (application grouping)	Cloth, sisal, and non-woven wheels plus pads, skins, wool, foam, and cushioning contact materials	Incoming scratch pattern, part geometry, contact method, and target appearance
PR pad-printing consumables	Silicone printing pads and related consumables managed as an independent application line	Part geometry, artwork, ink, and printing conditions

Polishing consumables are an application grouping here, not an additional series code. The product catalogue contains nine GNOSIQ series.

Public webpage information supports initial selection and does not replace controlled files issued for a specific model, batch, or market.

Buyer selection routes

Manual sanding on curved painted parts

Begin with the contour, coating condition and target finish. Check whether the sanding block can contact the area, then choose and validate a grit sequence on a representative part. GN-SA-BK70 is a manual P36–P280 option; its range does not cover every fine finishing step.

View GN-SA-BK70 selection guidance

Small PSA discs for local paint-defect repair

Compare the defect and starting surface before comparing model numbers. GN-SP-468 uses PSA latex paper in P1000–P5000; GN-SP-466 uses a pyramid structure on PE film in P2500–P5000. Confirm the tool interface, wet/dry method and next polishing step. No comparative removal rate or lifetime is claimed.

Compare GN-SP-468 and GN-SP-466

Technical Document Requests

To prevent obsolete or mismatched documents from being used, GUOWIN supplies controlled files after confirming the exact product, application, and market.

Available on request

GNOSIQ Abrasives

Current product information, formats, and application-based selection.

Request documents

Available on request

GNOSIQ Polishing Consumables

Solid wheels, pads, wool, foam, and contact-tool selection.

Request documents

Available on request

GNOSIQ Pad Printing Consumables

Silicone printing-pad information and application review.

Request documents

What to Include

Product family and model, if known
Substrate and current manufacturing process
Target finish or protection requirement
Destination country or applicable customer standard

Document Scope

Datasheets, SDS, declarations, test reports, and certificates are product- and market-specific. Their availability and scope are confirmed in the response; a family-level webpage statement should not be treated as a certificate.

Need a Controlled Document?

Send the product and target-market details so the current applicable file can be identified.

Request Documents